[. . . ] t General Safety Information WARNING ­ To avoid serious injuries: Obtain and read the service instructions carefully prior to installing the parts. [. . . ] The shifting lever can be installed to handlebars with diameters of 19. 0 ­ 22. 0 mm. Operation of the levers related to gear shifting should be made only when the front chainwheel is turning. Parts are not guaranteed against natural wear or deterioration resulting from normal use. For any questions regarding methods of handling or maintenance, please contact the place of purchase. Body unit 6 mm Allen key Tightening torque: 5 ­ 6 Nm {43 ­ 52 in. lbs. } 2. Install the lever boss to the body unit. SI-6J60A SL-BS78 Bar End Shifting Lever Lever boss Technical Service Instructions 3. Install the lever to the body unit. 5. With the outer casing placed along the handlebar, cover the outer casing with the outer casing guide, and then use tape or similar material to provisionally attach it to the handlebar. Tightening torque: 2. 5 ­ 3 Nm {21 ­ 26 in. lbs. } M5 Outer casing guide Lever grip Set so that the projection faces downward. Tape 6. Align the SIS mark and the red mark, and then set so that the lever grip faces downward. Wrap the handlebar with bar tape. SIS operation Turn the ring to select either SIS or friction. [. . . ] Phone: +1-949-951-5003 Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan C Jul. [. . . ]